Pro English Willow cricket bats vs Grade 2 and Grade 3 bats
- What a profile is: the shape of a bat side on, which decides where the wood sits and where the sweet spot is.
- Duckbill, Hawkbill or full profile: Duckbill for front-foot power, Hawkbill for fast hands and back-foot play, full profile for mass behind every shot.
- Concaving: scooping wood from the back makes a big bat pick up lighter; no concaving gives a solid, heavier feel.
- Spine position: low middle for slow, low pitches; mid middle for all-rounders; high middle for bouncy pitches and T20.
- Edges: thicker edges forgive a mishit but add weight. The Laws allow up to 40mm.
- Toe: a thick toe adds power low down for yorkers and drives; a thin toe moves the weight up for a lighter pickup.
- Choosing yours: start with where you play and how you score your runs.
1. What a bat profile is
Look at a bat from the side and you see its profile: how thick it is along its length, where the thickest part sits and how the wood tapers to the toe. Two bats can have the same weight and grade and still play completely differently, because the profile decides where the wood is.
The profile is made up of five things:
- The overall shape: Duckbill, Hawkbill or full profile.
- Concaving: whether wood has been scooped out of the back.
- The spine: the ridge down the back, and how high its thickest point (the middle) sits.
- The edges: how thick the sides of the blade are.
- The toe: how thick and what shape the bottom of the bat is.
Together they decide three things you’ll feel the moment you pick up a bat: the pickup, the sweet spot and how forgiving it is when you don’t middle it.
Back to top ↑2. Duckbill vs Hawkbill vs full profile
Most bats fall into one of three shapes.
| Duckbill | Hawkbill | Full profile | |
|---|---|---|---|
| Where the wood is | Low, with a thick, full toe | Higher up, with a thin toe | Spread evenly along the blade |
| Sweet spot | Low to mid | Mid to high | Long, through the middle of the blade |
| Pickup | Fuller, more weight at the bottom | Light, fast hands | Solid and heavier for its size |
| Best shots | Drives, lofted straight hits, digging out yorkers | Pulls, cuts, late shots, back-foot play | Players who want mass behind every shot |
| Best pitches | Slow, low pitches, like most UK club wickets | Hard, bouncy pitches | All conditions |
Duckbill
Named for its full, rounded toe, like a duck’s bill side on. The wood sits low, so full-length balls meet the most wood. If you score most of your runs in front of the wicket on the front foot, a Duckbill puts the power where you need it.
Hawkbill
The toe tapers to a thin point, like a hawk’s beak, and the weight moves up the blade. The bat feels lighter in your hands and comes down faster. It suits players who score square of the wicket off the back foot, and T20 batters who need bat speed.
Full profile
Thick along its whole length, with little or no concaving. It’s the most solid feel of the three, and the most forgiving along the blade, but it’s heavier for its size. It suits strong players who want wood behind the ball wherever it lands.
Back to top ↑3. Concaving vs no concaving
Concaving means scooping a little wood out of the back of the blade, on either side of the spine. It doesn’t touch the face, so it doesn’t change how the ball comes off the middle.
| Concaved | No concaving | |
|---|---|---|
| What it does | Removes weight from the back | Keeps all the wood |
| Pickup | Lighter for its size | Heavier for its size |
| Edges and spine | Lets the maker keep big edges and a deep spine without a heavy bat | Big edges and spine mean a heavier bat |
| Feel | Big-looking bat that swings easily | Solid, with mass behind the whole blade |
| Suits | Most modern players, especially T20 | Strong players who want a solid feel and don’t mind the weight |
Concaving is how a bat can look huge and still pick up light. If you like the look of big edges but find full bats too heavy, look for a concaved back.
Back to top ↑4. Spine position: low, mid or high middle
The spine is the ridge down the back of the bat. Its thickest point is called the middle, and where it sits sets the sweet spot.
| Middle | Where the sweet spot is | Pickup | Suits |
|---|---|---|---|
| Low middle | Towards the toe | Fuller, weight low down | Front-foot drivers on slow, low pitches |
| Mid middle | The middle of the blade | Balanced | All-rounders and players who use the whole crease |
| High middle | Higher up the blade | Lighter, faster hands | Back-foot players, bouncy pitches, T20 hitters |
A simple test: think about where the ball usually hits your bat. If your bat is marked low down, near the toe, you probably want a low or mid middle. If it’s marked higher up, a high middle puts the wood where you’re already hitting it.
5. Edge thickness
The edges are the sides of the blade. Thicker edges mean more wood behind a ball that doesn’t hit the middle, so a thick edge carries further and an outside edge can still fly over the slips.
- The Law: edges can be no thicker than 4.0cm (40mm), and the whole blade no deeper than 6.7cm.
- The trade-off: every extra millimetre of edge adds weight. That’s why big edges usually come with concaving.
- Our adult bats have 38 to 40mm edges, close to the legal limit.
Thinner edges keep a bat light and traditional to hold; thick edges make it more forgiving. Most players today prefer thick edges with a concaved back, for the best of both.
Back to top ↑6. The toe
The toe is the bottom of the bat. It’s easy to ignore, but its thickness and shape change both the feel and how long the bat lasts.
Toe thickness
- A thick toe (Duckbill) keeps wood low, for driving and digging out yorkers. It also stands up better to tapping in the crease.
- A thin toe (Hawkbill) moves weight up the bat for a lighter pickup, but has less wood to protect.
Toe shape
- Round toe: curved at the bottom. Less likely to catch the ground, and the corners are less likely to chip.
- Square toe: flat across the bottom, with a little more hitting area right at the base of the blade.
Whatever the toe, it’s the part of the bat that soaks up water from damp grass. On wet UK grounds, a toe guard is worth fitting.
Back to top ↑7. How to choose your profile
Start with where you play and how you score your runs. Then pick up the bat: the profile should feel like it suits the way you already bat.
| You are | Profile | Middle | Back |
|---|---|---|---|
| A front-foot driver on slow UK pitches | Duckbill | Low or mid | Concaved or not, to suit your strength |
| A back-foot player on bouncy pitches | Hawkbill | Mid or high | Concaved |
| A T20 hitter | Hawkbill or Duckbill with big edges | Mid or high | Concaved |
| An all-rounder playing every format | Full profile or mid-middle Duckbill | Mid | Lightly concaved |
| A strong player who wants mass | Full profile | Mid | No concaving |
Weight matters just as much as shape. A profile you love won’t help if the bat is too heavy to swing for a whole innings. Our next guide in this series covers bat weight, including how the profile changes how heavy a bat feels.
8. Cricket bat profile FAQs
What is the difference between a Duckbill and a Hawkbill bat?
A Duckbill has a thick, full toe and its wood low down, for front-foot power. A Hawkbill has a thin toe and its wood higher up, for a lighter pickup and back-foot play.
Which bat profile is best for UK pitches?
Most UK club pitches are slow and low, so many players prefer a Duckbill or a low-to-mid middle. If you play mostly off the back foot or on hard pitches, a higher middle may suit you better.
Does concaving make a bat weaker?
No. Concaving takes wood from the back, not the face, so it doesn’t change how the ball comes off the middle. It makes the bat lighter for its size.
Are thicker edges always better?
Not always. They forgive mishits, but they add weight. Choose thick edges if the bat still picks up well for you.
Where is the sweet spot on a cricket bat?
On most bats it’s around 15cm (6in) from the toe. A low middle moves it towards the toe; a high middle moves it up the blade.
Can I choose my bat’s profile?
Yes. Message us and we’ll match a bat from our range to how you play, or build you a custom English willow bat in the profile you want.
Back to top ↑- English willow cricket bats: the complete guide
- Cricket bat profiles: Duckbill, Hawkbill and full profile (you are here)
- Cricket bat weight (coming soon)
- Cricket bat length (coming soon)
- Standard vs custom cricket bats (coming soon)
- Cricket bat grades explained
- Cricket bat handles (coming soon)
- Toe guard or no toe guard (coming soon)
- Anti-scuff sheets (coming soon)
- Types of cricket bat grips (coming soon)
- Pro English willow cricket bats vs Grade 2 and Grade 3 bats